Verus Engineering Full Brake Cooling Kit Mazda Miata (MX-5) 2016+ ND

The Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using the OEM fog lights as the inlet to the kit and a well-formed duct on the backing plate directing airflow into the center of the rotor. The inlet of the kit is a beautiful carbon duct that features a constantly decreasing cross-sectional area that promotes and improves flow through the brake cooling kit. The kit comes with everything necessary for an install, including pre-cut hose.

During the design process; we utilized in-house scan data from the ND. This resulted in a product that features a near OEM fit and finish.

The brake cooling kit was designed for owners looking to reduce brake fade and improve the thermal characteristics of the brakes on the ND Miata.

Included:

• Backing Plate Including Carbon Duct, Right-Hand
• Backing Plate Including Carbon Duct, Left-Hand
• Carbon Fog-Light Duct, Right-Hand
• Carbon Fog-Light Duct, Left-Hand
• 2.5 Inches High-Temp Silicone Hose, Cut to Size (2)
• Stainless Hose Clamp (2)
• Zip-Tie (8)

Via tuft testing and thermal image testing, it is quite clear that the brake cooling kit is highly effective even when used with the OEM rotors which have quite small vanes when compared to those of big brake kits. Smaller vanes will hurt flow and cooling due to the reduced size. With the brake cooling kit, the rotors remained much cooler directly after applying the brakes as well as after a short drive without using the brakes. It is also apparent that at high rates of speed, the brake cooling kit does significantly more than at lower speeds. This makes a lot of sense as the kit works by using frontal ambient air and funneling it into the center of the rotor. At higher speeds, pressure and flow rates are greater than at low speeds. We have heard reports back from customers tracking their cars having reduced brake fade, reduced rotor cracking, improved pad wear, and reduced brake fluid boiling. This is a great kit to help keep brake components at an appropriate temperature during competition and|or track days.

Features:

• Carbon Fog-Light Ducts
• Part Number: A0114A
• Direct Air into the Center of the Rotor
• Stainless Backing Plate Adds Even More Airflow into Center of the Rotor
• OEM Type Install
• Installs in a Few Hours With Minimal Hand Tools and Know-How
• Short Routing to Maximum Cooling Efficiency
• Stainless Backing Plate
• 100 Percent Carbon Fiber, 2x2 Twill, Autoclave Cured Carbon Fiber Ducts
• Pre-cut High-Temp Silicone Brake Duct Hose
• All Necessary Hardware Included
• Made in the U.S.A.

Fitment:

• Mazda Miata (MX-5) 2016+

Information Packet: 

Instalation:

 

Returns Policy

To RETURN any system, product or merchandise you must contact us first for a Return Authorization (RA) Number. Special order and custom made systems, apparel, Carbon Fiber Parts (unless defective), and other certain merchandise are NOT returnable. ALL SALES ARE FINAL. To return a Grid Racing Parts product an RA number must be requested and if granted the item(S) must be in original Grid Racing Parts sealed packaging. A copy of the original invoice and a brief explanation must accompany all returned items. You must follow our instructions for returning items carefully, or Grid Racing Parts reserves the right to charge a 30% restocking fee on any OPENED box or repackaged products. Customers are responsible for return shipping charges. If an order was shipped with a promotional “Free Shipping”, and the order is returned, we exclusively reserve the right to charge the customer or distributor for the cost of that original shipping and handling. If a Grid Racing Parts Performance package is ordered, and an individual component of that package is returned, Grid Racing Parts reserves the right to charge back the performance package discount along with any additionally offered discounts. Return shipped items DAMAGED in transit will RESULT in additional charges up to and including rejection of the competent. It is the customer’s responsibility to ship safely and properly. No returns accepted after 30 days from the invoice date. No credits will be given after 30 days from the invoice date.

To qualify for return, the product must be unused and remain in the original packaging, as well as match the current design and packaging for the product at the time of return. Sounds is subjective and therefore does not qualify for a return of a used product. See Sound Solution Guarantee to see if your product is covered.

Periodically mistakes are made when ordering, or a wrong part is shipped, and you may wish to return an item. We will do everything reasonable to satisfy you. Please contact Grid Racing Parts immediately via email at service@GridRacingParts.com to discuss the circumstances before returning any products. Anything returned without prior authorization from Grid Racing Parts will be refused. All returns must be sent back fully prepaid. Our customer service department (service@gridracingparts.com) will issue a Return Authorization Number, which must accompany any return. A copy of the original invoice and a brief explanation must accompany all returned items. No returns accepted after 30 days from the invoice date. No credits given after 30 days.

Shipping

Grid Racing Parts cannot be held liable for refusal of, delay of, loss of, theft or damage to a shipment of any item. The customer agrees to indemnify Grid Racing Parts for all costs, fees and expenses Grid Racing Parts incurs as a result of any violation of any local, state, federal, national or international laws or regulations. Customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. Customer accepts these risks and agrees to release Grid Racing Parts of all liability.

Grid Racing Parts reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited.

A 8.25% sales tax will be implemented for every purchase made by a Texas resident. This fee will be charged for in-house installations and products purchased online, over the phone, and/or via email, this fee is required by law, is non-negotiable and non-refundable.